Notice: Undefined variable: prostyle1 in D:\Indsoft\\web\left-products-new.php on line 102


Salient Features
• PCIe 2.0 bus-compliant, with PCIe 1.0 backward compatibility supported
• Support for Message Signaled Interrupts eXtended (MSI-X), improves host utilization & enhances application performance
• Support for 8GFC, 4GFC and 2GFC Fibre Channel devices
• Comprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual Fabric
• Host-to-Fabric FC-SP authentication
• T10 Protection Information (T10 PI) ready - ensures end-to-end data integrity
• Common driver model allows a single driver to support all Emulex HBAs on a given OS
• Easy deployment of new firmware with minimal server reboots
• Efficient centralized administration of Emulex HBAs via powerful management tools

Lifecycle Active

Distrib. Inventory No

Ordering Part # M-LPe12002, 2 Ports 8GFC Short Wave Optical - LC SFP+

Whats in the box • 1x low-profile Host Bus Adapter
• 1x full-height bracket
• 1x low-profile bracket

Generation 8GFC

Physical Dimensions Short, low profile MD2 form factor card 167.64mm x 68.91mm (6.60” x 2.71”) Standard bracket (low profile available)

Cable Support 50/125μm (2000MHz*km BW)-up to 150m, 50/125μm (500MHz*km BW)-up to 50m

Optical Data Rates 8.5, 4.25 and 2.125Gb/s (auto-detected)

Data Transfer Rates Supports 8GFC, 4GFC and 2GFC link speeds, automatically negotiated

Hardware Environment PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family

Ports 2

Optics Short wave lasers with LC type connector

Host Bus Type x8 lane PCI Express® 2.0

Operating Humidity 5% to 95% non-condensing

Operating Temperature 0°C to 55°C

Storage Temperature -40° to 70° C

Operating Voltage (V) +3.3V, +12V

Operating Temperature Additional support is available from OEMs and partners, Linux, NetWare, Solaris, VMware

Power Supply 1.8V, 1.2V, 0.9V

Industry Standards ANSI Fibre Channel: FC-PI-4, FC-AL-2, FC-DA, FC-FLA, FC-FS-2, FC-FS-2/AM1, FC-GS-6, FC-HBA and SMI-S v1.1, FC-LS, FC-PLDA, FC-SP, FC-TAPE, FCP through FCP-4, Fibre Channel class 2 and 3, PCI Express Base Specification Rev. 2.1, PCI Express Card Electromechanical Specification (CEM) 2.0, PHP hot plug-hot swap, SBC-3

Regulatory Certifications AS/NZS CISPR:2009 +A1, Class A, Australian EMC Framework (RCM), BSMI Class A, CNS13438:2006 (complete), China RoHS Compliant, EMC Directive 2004/108/EC (CE Mark), EN55022:2010, Class A, EN55024:2010, EU RoHS Compliant (Directive 2011/65/EU), FCC Part 15, Class A, ICES-003:2012, Class A, MSIP (formally KCC/MIC), Class A, TUV Bauart-certified to EN60950-1:2006 +A11+A1+A12, UL recognized to UL 60950-1 2nd edition, VCCI Class A, cUR recognized to CSA22.2, No. 60950-1-07