fusionstor












FusionStor Invento i6109 EPYC Series


Salient Features
1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. Up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs; 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required)
3. 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8
4. Up to 2 USB 3.0 ports, Up to 4 USB 2.0 ports
5. Dual Gigabit Ethernet LAN Ports
6. ASPEED AST2500 BMC
7. 8 x 3.5" hot-swap SAS3/SATA drive bay, 2 x 3.5" fixed drive bay
8. 800W Redundant Power Supply (96% Efficiency) 80PLUS Titanium Level


Processor Support 2 x AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)

Core Logic System on Chip

Memory • 16 x DIMM slots;
• Up to 2TB Registered ECC DDR4 2666MHz SDRAM
• Up to 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required)

Expansion Slot • PCI-E Slots:-
- 3 PCI-E 3.0 x8
- 2 PCI-E 3.0 x16
• M.2:-
- Interface: 1 SATA/PCI-E 3.0 x2
(Platform with EPYC 7002 processor only supports PCI-E type M.2 module)
- Form factor: 2280, 22110
- Key: M-key

Cooling Feature 3 x 80mm Hot-Swap PWM Fans

Drive Bays • 8 x 3.5" hot-swap SAS3/SATA drive bay
• 2 x 3.5" fixed drive bay

Network Controller • 2 1GbE LAN via Intel® i350-AM21
• 1 Realtek RTL8211E PHY (dedicated IPMI)

Onboard I/O • SATA:- 10 SATA3 (6 Gbps) ports
• LAN:- 2 RJ45 Gigabit Ethernet LAN ports, 1 RJ45 Dedicated IPMI LAN port
• USB: 2 USB 3.0 ports (rear), 4 USB 2.0 ports (2 rear + 2 via header)
• Video Output: 1 VGA port
• Serial Port / Header: 1 COM port (rear), 2 SATA DOM power connector
• TPM: 1 TPM Header

IPMI • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC

Graphics ASPEED AST2500 BMC

Power Supply • 800W Redundant Power Supply (96% Efficiency) 80PLUS Titanium Level

Dimension / Form Factor 2U Rackmount