fusionstor












FusionStor Invento i610 EPYC Series


Salient Features
1. Dual AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)
2. Up to 4TB Registered ECC DDR4 2666MHz SDRAM in 32 DIMMs (7001 Processors); 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs (Board revision 2.x required + 7002 Processors)
3. 1 PCI-E 3.0 x16 slot (FH, 10.5" L), 5 PCI-E 3.0 x8 slots (FH, 9.5" L), 1 PCI-E 3.0 x8 slot (LP), 1 PCI-E 3.0 x8 (internal proprietary LP slot)
4. Quad Gigabit LAN ports via Intel i350AM4
5. 12 hot-swap 3.5" Drive Bays
6. 1600W Redundant Power Supplies Titanium Level (96%+) (Full redundancy based on configuration and application load)


Processor Support 2 x AMD EPYC™ 7001/7002* Series Processors (*AMD EPYC 7002 series drop-in support requires board revision 2.x)

Core Logic System on Chip (SoC)

Memory • 32 DIMM slots;
• Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors)
• Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors)

PCIe Expansion Slot • 1 PCI-E 3.0 x16 slot (FH, 10.5" L)
• 5 PCI-E 3.0 x8 slots (FH, 9.5" L)
• 1 PCI-E 3.0 x8 slot (LP)
• 1 PCI-E 3.0 x8 (internal proprietary LP slot)

HDD Backplane Supports 12 SATA3 or 8 SATA3 + 4 NVMe or 12 SAS3 HDD

Drive Bays • 12 Hot-Swap 3.5" Drive Bays:
- 12 SATA3 by default
- Optional Drive Support:
- 8 SAS3 + 4 SAS3/NVMe
• 2 Rear Hot-Swap 2.5" drive bays

Networking • Quad Gigabit LAN ports via Intel i350AM4
• 1 RJ45 Dedicated IPMI LAN port

Onboard I/O • SATA: 12 SATA3 (6 Gbps) ports
• USB: 3 USB 3.0 ports (2 rear + 1 Type A)
• VGA: 1 VGA port
• SAS: 12 SAS3 ports support via optional Add-on Card
• NVMe: 4 NVMe support with optional cables
• Others:
- 1 COM port (rear)
- 2 SATA DOM power connector
- TPM 1.2 header

Power Supply 1600W Redundant Power Supplies Titanium Level 80PLUS (96%+ Efficiency)

Dimension / Form Factor 2U Rackmount