Notice: Undefined variable: prostyle1 in D:\Indsoft\fusionstor.com\web\left-products-new.php on line 102
>


FusionStor Invento i681


Salient Features
Four hot-pluggable systems (nodes) in a 2U form factor.
Each node supports the following:
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600 v4/ v3 family;
QPI up to 9.6GT/s family
2. Up to 2TB ECC 3DS LRDIMM, up to DDR4- 2400MHz; 16x DIMM slots
3. 1x PCI-E 3.0 x16 Low-profile slot
4. lntel® i350-AM2 Dual port GbE LAN
5. 1x Realtek RTL8201N PHY (dedicated IPMI)
6. 3x 3.5" Hot-swap SAS/SATA HDD Bays
7. 2000W Redundant Power Supplies


Processor Support 2 X Intel® Xeon® processor E5- 2600 v4/ v3 family; QPI up to 9.6GT/s family

Core Logic Intel® C612 chipset

Memory 16x DIMM slots ;
Up to 2TB ECC 3DS LRDIMM, up to DDR4- 2400MHz

PCIe Expansion Slot • 1x PCI-E 3.0 x16 Low-profile slot

RAID Options SAS:- Broadcom 3108 SAS3 (12Gbps) controller; RAID 0, 1, 5, 10 support

Drive Bays 3x 3.5" Hot-swap SAS/SATA HDD Bays

IPMI feature • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• ASPEED AST2400 BMC

Networking • 2x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port

Onboard I/O SAS:- 3x SAS3 (12Gbps) ports
USB:- 2x USB 3.0 ports total (2x rear)
VGA:- 1x VGA port
Serial Port / Header:- 1x Fast UART 16550 port / 1 Header (internal)
Others :- 1x SATADOM support on the motherboard

Power Supply 2000W Redundant Power Supplies Titanium Level 80PLUS (96%)

Dimension / Form Factor 2U Rackmount